4D-300 (COOLANT/OIL) SERIES 
  
 
  
    Industrial Vacuum Cleaner (Electrically Operated) for the Recovery of Large Quantities of Coolant/Oil mixed with some Metal Chips 
  
 
 
    
      Certifications
 
      
      
        
          | 
              
      
              
              
                
                | 
                    
                      |  | Applicable Requirements :ANSI/UL 1017
 CSA C22.2 No.243
 |  |  
                |  |  | 
 
      
 
      
      
 
 
 
      Features
 
      
      
        
          | 
              
      
              
              
              Electric industrial vacuum system for the recovery of large quantities of coolant/oil mixed with some metal chips
              
      
              
              
              The powerhead with dual bypass/dual speed long life motors is mounted directly on the recovery tank
              
      
              
              
              The internal volume of the recovery tank is 55 gal. (200L). There is a basket in the upper part of the recovery tank which collects the metal chips
              
      
              
              
              The basket can hold 10 gal. (30L) of metal chips, which allows 45 gal. (170L) of coolant/oil to be recovered in the lower part of the recovery tank
              
      
              
              
              Coolant/oil is emptied using the manual drain valve
              
      
              
              
              An electric discharge pump is available for emptying the recovered coolant/oil. The flow rate of the optional pump is 80 gallons per minute (300L/min)
              
      
              
              
              Four 5" (125 mm) wheels, allow for maximum maneuverability
              
      
              
              
              A floater (liquid cut-off) is installed under the powerhead to prevent overfilling
              
      
              
              
              a 100 PPL Protection Filter is also included.  The protection filter prevents smaller particles from getting into the pump
              
       | 
 
      
 
      
      
     
 
    
    
 
    
       
     
 
    
      
Technical Specs - North America
 
    
 
    
 
    
    
 
    
      
      
      | Specifications | 112636A | 112638A | 
| Model Name | 4D-300 (COOLANT/OIL) | 4D-300 (COOLANT/OIL) | 
| Type | Electric | Electric | 
| Tension | 120 V | 120 V | 
| Frequency | 60 Hz | 60 Hz | 
| Phase | Single | Single | 
| Wattage | 2040 W | 2400 W | 
| Power | 2.7 HP | 3.2 HP | 
| Amperage | 15.2 A | 21 A | 
| Air Flow | 200 CFM | 220 CFM | 
| Vacuum Pressure | 90 " H20 | 107 " H20 | 
| Type of Power Outlet | Not Included | Not Included | 
| Suction Inlet Port | 80 mm | 80 mm | 
| Cart Type | Carriage Base (CB) | Carriage Base (CB) | 
| Liquid Recovery Capacity | 45 gal. | 45 gal. | 
| Solid Recovery Capacity | 10 gal. | 10 gal. | 
| Length | 47 " | 47 " | 
| Width | 24 " | 24 " | 
| Height | 51 " | 51 " | 
| Weight (Vacuum Only) | 415 lb. | 415 lb. | 
| Cord Length | 33 ft. | 33 ft. | 
|
 
      
        Please note that specifications are subject to change without notice