Health & Safety Industrial Vacuum Cleaners with HEPA filter (H14) for light maintenace applications. Designed for the remediation of asbestos, silica, lead and mold.
Recommended vacuum cleaners for the recovery of dry and wet/saturated asbestos
Tiger-Vac is pleased to present it's line of vacuum cleaners designed for the remediation of asbestos, silica, lead and mold. These vacuum cleaners are equipped with true HEPA Filters and are Aerosol Leak Tested before leaving our facilities.
Tiger-Vac certifies the filter used in this vacuum cleaner has been individually tested by the manufacturer.
Tiger-Vac also certifies that this vacuum cleaner has been individually tested for absolute filtration. Testing was performed using the recommendations, standards and methods contained in IEST-RP-CC001.3 section 9. The challenge aerosol used was PAO (polyalphaolefin) Emery 3004.
H
WARNING: This appliance contains dust hazardous to health. Emptying and maintenance operations, including removal of the dust collection means must only be carried out by authorized personnel wearing suitable personal protection. Do not operate without the full filtration system fitted.
H
ATTENTION! PRESUMPTION OF CONFORMITY:
If a Leak Test is not performed each time a vacuum cleaner is assembled with a HEPA (H14) or ULPA (U15) Filter it is a Presumption of conformity. In not performing the Leak Test each time, and just afixing the H Sticker to the unit, the manufacturer cannot guaranty that a leak will not occur and endanger the health and safety of the end user.
Tiger-Vac is pleased to present it's line of vacuum cleaners designed for the remediation of asbestos, silica, lead and mold. These vacuum cleaners are equipped with true HEPA Filters and are Aerosol Leak Tested before leaving our facilities.
Tiger-Vac certifies the filter used in this vacuum cleaner has been individually tested by the manufacturer.
Tiger-Vac also certifies that this vacuum cleaner has been individually tested for absolute filtration. Testing was performed using the recommendations, standards and methods contained in IEST-RP-CC001.3 section 9. The challenge aerosol used was PAO (polyalphaolefin) Emery 3004.
| H | WARNING: This appliance contains dust hazardous to health. Emptying and maintenance operations, including removal of the dust collection means must only be carried out by authorized personnel wearing suitable personal protection. Do not operate without the full filtration system fitted. | H |
ATTENTION! PRESUMPTION OF CONFORMITY:
If a Leak Test is not performed each time a vacuum cleaner is assembled with a HEPA (H14) or ULPA (U15) Filter it is a Presumption of conformity. In not performing the Leak Test each time, and just afixing the H Sticker to the unit, the manufacturer cannot guaranty that a leak will not occur and endanger the health and safety of the end user.
Lightweight
T1-3L (BP) HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- 3-stage filtration system includes a HEPA Filter H14, Cloth Filter and Disposable Filter Bag
- Designed for general cleanup
- Lightweight and portable
- Single phase thru-flow motor
- For dry recovery only
- All plastic construction
- Recovery capacity of 0.8 gallon (3 liters) in Disposable Filter Bag
- Equipped with a backpack harness
- Complete tool kit included
- Dustless Drill Kit available
AS-5 HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- Thru-Flow heavy duty motor
- Equipped with a 4-stage filtration system
- For dry recovery only
- Heavy duty plastic recovery tank
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
AS-6 HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- Thru-Flow heavy duty motor
- Equipped with a 4-stage filtration system
- For dry recovery only
- Heavy duty plastic recovery tank
- Illuminated switch and dust bag full indicator
- Ready to use: filters and tool kit included
- Equipped with a 4-wheel base with on board accessories storage
AS-10 HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- Thru-Flow heavy duty motor
- Equipped with a 3-stage filtration system
- For dry recovery only
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
- 1260 WATT motor and 50' grounded power cord available
- Carriage Base with Accessories Tray also available
ASL-10 HEPA MR
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- By-Pass heavy duty motor
- Equipped with a 4-stage filtration system
- For wet and dry recovery
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
- 1260 WATT motor and 50' grounded power cord available
- Carriage Base with Accessories Tray also available
AS-10 HEPA (ECO SERIES)
Electrically Operated
Electrically Operated
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- Powerful suction - designed for industrial applications
- Lightweight and ergonomic
- Four stage filtration system
- Ready to use: includes HEPA Filter and tool kit
- Convenient design allows easy access to HEPA Filter while maintaining leak proof seal
- Very silent: only 62 dB(A)
- Built-in tool storage tray
AS-400 HEPA (Dry)
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos.
- Lightweight and portable.
- By-Pass heavy duty motor.
- Equipped with a 3-stage filtration system.
- For dry recovery only.
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available.
- Ready to use: filter and tool kit included.
- Equipped with a 4-wheel cart.
- Built-In Tool Storage Tray with two large 6 3/4" (170mm) rear wheels and two 2 1/4" (60mm) front wheels.
- Dustless Drill Kit available.
- 50' grounded power cord available.
AS-400 MR HEPA (W&D)
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
Standard(s) for Electric Vacuum Cleaning Machines and Blower Cleaners (UL-1017)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- By-Pass heavy duty motor
- Equipped with a 3-stage filtration system
- With a Middle Ring for wet and dry recovery. Liquid/dry recovery capacity of 10 gallons (38 liters)
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel cart
- Built-In Tool Storage tray with two large 6 3/4" (170mm) rear wheels and two 2 1/4" (60mm) front wheels
- Dustless Drill Kit available
- 50' grounded power cord available
Heavy Duty
2D-16 (TC) RE HEPA MR (ASBESTOS)
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- Middle Ring for poly liner for the recovery of wet/saturated asbestos
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 15 gallons (57 liters)
- Silent operation
- Tilt cart (TC) for easy disposal of recovered materials
- Dustless Drill Kit available
4D-16 (TC) RE HEPA MR (ASBESTOS)
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- Designed for the recovery of wet/saturated asbestos
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 15 gallons (57 liters)
- Silent operation
- Tilt cart (TC) for easy disposal of recovered materials
- Dustless Drill Kit available
TV-250 (DT) MFS EXTENDED HEPA
Electrically Operated
Electrically Operated
Power: 1-5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler optional
- Manometer included
- Equipped with Manual Filter Shaker (MFS)
- Designed for general maintenance
- Continuous duty 3-phase motor
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials·
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included.· Other optional accessories according to your needs available
TV-4 STD MFS
Electrically Operated
Electrically Operated
Power: 5 HP OPT. 7.5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Filter Shaker (MFS) system
- washable Main and Pre-Filters contained within a removable Filter Chamber
- Designed for the recovery of asbestos, lead, mold, etc.
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Recovery Units
STV-114L
- Designed for the remediation of wet/saturated Asbestos
- To be connected to any power/suction unit
- Wet & dry recovery
- Drain valve opening, Ø2" (Ø50mm), located on the bottom of the recovery tank
- Can be sold as a complete unit, including standard drum and dolly, or as a top fill powerhead only
- Recovery capacity of 23 gallons (85 liters)
- Suction intakes, Ø2.5" (can accept Ø50mm and Ø70mm suction hoses)
- Based on a detachable 4-wheel dolly with ring and handles
- Special asbestos recovery poly liner and clip included
- Tools and accessories optional
OTHER MODELS AVAILABLE
Heavy Duty Construction Industrial Vacuum Cleaner Systems with HEPA Filtration H14 - Aerosol Tested - Electrically Operated Single Phase. Designed for the remediation of asbestos, silica, lead and mold.
B-4 DS HEPA STATIC FREE
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for use in contamination controlled environments
- Powerful dual speed thruflow motor
- 4-stage filtration system
- ESD safe/RFI shielded
- For dry recovery only
- Made entirely of chrome-polished steel
- Silent operation
- Ready to use: filters and tool kit included
- Equipped with 4 wheels
B-4/B-7 DS HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for use in contamination controlled environments
- Powerful dual speed thruflow motor
- 4-stage filtration system
- For dry recovery only
- High-density Polyethylene recovery tank with polished metal powerhead
- Silent operation
- Equipped with 4 wheels
B-8 RE HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 8 gallons (30 liters). Powder coated recovery tank available
- Silent operation
- Equipped with 4 wheels
2D-15 (TC) RE HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 12.5 gallons (47 liters)
- Silent operation
- Tilt cart (TC) for easy emptying of recovered materials
2D-25 (TC) RE HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 17 gallons (65 liters)
- Silent operation
- Tilt cart (TC) for easy emptying of recovered materials
4D-25 (TC) RE HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- For wet and dry recovery
- High-density polyethylene recovery tank. Liquid recovery capacity of 17 gallons (65 liters)
- Silent operation
- Tilt cart (TC) for easy emptying of recovered materials
4D-57 (TC) RE HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- For wet and dry recovery
- Available with either a heavy duty powder coated or high-density polyethylene recovery tank. Liquid recovery capacity of 55 gallons (200 liters)
- Silent operation
- Tilt cart (TC) for easy emptying of recovered materials
Heavy Duty Metallic Contruction Industrial Vacuum Cleaner Systems with HEPA Filter (H14) - Aerosol Tested with Stainless Steel Detachable Recovery Tank - Electrically Operated Single Phase. Designed for the remediation of asbestos, silica, lead and mold.
2D-25L (DT) MFS HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-Wheel cart and wire tool basket
2D-25L (DT) MRP HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank.
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
4D-25L (DT) MFS HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-Wheel cart and wire tool basket
4D-25L (DT) MRP HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-Wheel cart and wire tool basket
4D-55L (DT) MFS SERIES
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with a 4-Wheel cart and wire tool basket
BLSD-25L (DT) MFS HEPA
Electrically Operated
Electrically Operated
Power: MAX 1500 WATTS
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
BLSD-25L (DT) MRP HEPA
Electrically Operated
Electrically Operated
Power: MAX 1500 WATTS
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
BLSD-55L (DT) MFS HEPA
Electrically Operated
Electrically Operated
Power: MAX 1500 WATTS
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
Heavy Duty Metallic Construction Industrial Vacuum Cleaner Systems with HEPA filtation H14 - Aerosol Tested with Stainless Steel Detachable Recovery Tank - Electrically Operated Three-Phase. Designed for the remediation of asbestos, silica, lead and mold.
CD-5000 STD HEPA
Electrically Operated
Electrically Operated
Certifications
Applicable requirements:
ANSI/UL 1017
CSA C22.2 No. 243
ANSI/UL 1017
CSA C22.2 No. 243
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty 3-phase motor
- Available with Manual Filter Shaker (MFS)
- Also available for wet and dry recovery
- Available with middle ring (MRAC) with activated carbon
- All stainless steel 304/316 construction
- Liquid recovery capacity of 18 gallons (68 liters)
- Equipped with a 4-wheel cart for easy manoeuverability
TV-250 (DT) MFS NO HEPA
Electrically Operated
Electrically Operated
Power: 1-5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with Manual Filter Shaker (MFS)
- Designed for general maintenance
- Continuous duty 3-phase motor
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
TV-250 (DT) MRPFT NO HEPA
Electrically Operated
Electrically Operated
Power: 1-5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ((U-O))
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge with Filter Tubes (MRPFT)
- Designed for general maintenance
- Continuous duty 3-phase motor/blowers
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
TV-250 (W&D) NO HEPA
Electrically Operated
Electrically Operated
Power: 1-5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Ideal for wet recovery. Unit is equipped with a wet floater system and liquid filter. A dry filter is also included for occasional dry bulk recovery
- Designed for general maintenance
- Continuous duty 3-phase motor/blowers
- Camlock, Ø2" (Ø50mm)suction intake
- All powder coated steel construction
- Recovery Tank with a capacity of 17 gallons (65 liters) wet and 15 gallons (57 liters) dry
- Accessories kit included. Other optional accessories according to your needs available
TV-4 STD MRP
Electrically Operated
Electrically Operated
Power: 5 HP OPT. 7.5 HP
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge (MRP) system
- Reverse Purge Filter Cartridge contained within a removable Filter Chamber
- Designed for general cleanup
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
SRV-55
Electrically Operated
Electrically Operated
Power: 3.5-5 HP
Certifications
Meets EU safety, health and environmental protection requirements
- Ideal for the recovery bulky and lightweight scrap material
- Can be connected to process machines
- Continuous duty single and 3-phase motor
- Sight glass to monitor collection bag capacity
- For dry recovery only
- Powder coated steel construction. Stainless Steel AISI 304 available upon request
- Equipped with 4 wheels
CD-10000/15000 (DT)
Electrically Operated
Electrically Operated
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty 3-phase motor - 10-15 HP (11-15 kW)
- To be used with a continuous Duty Power Unit (CDPU)
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Automatic Purge system (APS)
- For dry recovery only
- Heavy duty powder coated construction. Stainless steel version available.
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 15-40 gallons (57-152 liters)
- System is divided into 2 pieces - the Filtration System (FRS) and the Power Unit (CDPU)
CDPU-10000/15000
Electrically Operated
Electrically Operated
Certifications
CLEANING MACHINE
CLASS 16 1101 - 16 1181
All the electrical components are recognized or certified UL or CSA and qualifies for all applicable requirements C 22.2 No. 243-01 & STD No. 1017
- For general cleanup
- Continuous duty 3-phase motor
- Power Unit can be attached to a Filtration System (FRS)
- Can be used as a mobile or central unit
- Heavy duty powder coated construciton. Also available in all stainless steel
- Equipped with 4 wheels for easy maneuverability. Can also be equipped with slots for fork lift capabilities
Heavy Duty Construction Industrial Vacuum Cleaner Systems with HEPA Filtration H14 - Aerosol Tested - Pneumatically (air) Operated. Designed for the remediation of asbestos, silica, lead and mold.
CS-4 RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general maintenance
- Pneumatically (air) operated
- For dry recovery
- High-density Polyethylene recovery tank
- Equipped with 4 wheels
CS-8 RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 8 gallons (30 liters). Powder coated metal recovery tank available
- Equipped with 4 wheels
CS-15 (TC) RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 12.5 gallons (47 liters)
- Tilt cart (TC) for easy emptying of recovered materials
CS-25 (TC) RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- For wet and dry recovery
- Hight-density Polyethylene recovery tank. Liquid recovery capacity of 17 gallons (65 liters)
- Tilt cart (TC) for easy emptying of recovered materials
CS-30 (CB)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- Designed for use in the Powder Coating Industry
- Pneumatically (air) operated
- For dry recovery only - optional Floater System available liquid recovery
- Heavy duty powder coated body. Recovery capacity of 30 gallons (114 liters)
- Ready to use: filters and tool kit included
- Includes a muffler for noise reduction
- Equipped with a heavy duty 4-wheels dolly
CS-55 (CB)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- Designed for use in the Powder Coating Industry
- Pneumatically (air) operated
- For dry recovery only - optional Floater System available liquid recovery
- Heavy duty powder coated body. Recovery capacity of 55 gallons (209 liters)
- Ready to use: filters and tool kit included
- Includes a muffler for noise reduction
CS-55 (TC) RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated. Single or twin venturi for higher power
- For wet and dry recovery. Designed to recover large spills
- Heavy duty powder coated body. Liquid recovery capacity of 55 gallons (209 liters)
- Tilt cart (TC) for easy emptying of recovered materials. 4 wheel dolly also available
- Dustless Drill Kit available
CS-7 HEPA (SCVP)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- For dry recovery only
- High-density Polyethylene recovery tank
- Self closing vacuum port
- Equipped with 4 wheels for easy maneuverability
CS-15 (2+2) HEPA (SCVP)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Meets EU safety, health and environmental protection requirements
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- For dry recovery only
- High-density Polyethylene recovery tank
- Self closing vacuum port
- 2+2 cart for easy mobility
Heavy Duty Metallic Construction Industrial Vacuum Cleaner Systems with HEPA filtation H14 - Aerosol Tested with Stainless Steel Detachable Recovery Tank - Pneumatically (air) Operated. Designed for the remediation of asbestos, silica, lead and mold.
AVSD-25L (DT) MFS HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank.
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* Static Dissipative
AVSD-25L (DT) MRP HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
AVSD-55L (DT) MFS HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
CS-11 (DT) MRP (RE) HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
Designed for use in Class I, II and III, Division 2 Hazardous Locations as defined in the National Electric Code (NFPA 70)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* - Static Dissipative
