Tiger-Vac, as the manufacturer, GUARANTEES, that these units can be used to safely recover combustible /conductive dusts and/or flammable liquids.
The ATEX marking certifies only, by it's Ingress of Protection (IP), the capacity of the vacuum cleaner to be in the presence of combustible /conductive dusts and/or flammable liquids but does not certify the capacity of the vacuum cleaner to recover them.
Fuel and solvents recovery vacuum cleaner systems:
ATEX Category 2 Explosion proof vacuum cleaner systems for ATEX Zone 1 (Gas) and
ATEX Zone 21 (Dust) (where indicated)
|
|
Electrically Operated Models
0081 
II 2 G/D EEx d IIB T4IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Three-Phase motor
- Fuel and solvent recoveryi
- Equipped with a Middle Ring with Activated Carbon (MRAC) for for adsorption of toxic/nuisance fumes and vaporsi
- Carbon cartridge contains 18 lbs (8 kg) of activated carbon pellets. Different types or carbon are availablei
- Recovery capacity of 15 gallons (57 liters) - liquid and 17 gallons (64 liters) - dry
- Equipped with a heavy duty powder coated hydrolic cart for easy emptying of recovered materials
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRAC - Middle Ring with Activated Carbon
Activated carbon is used for the adsorption of toxic/nuisance fumes and vapors. Tiger-Vac offers a variety of activated carbons for the recovery of fuels, mercury, chloride and acid vapors and for Arsine and Phosphine.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| CD-25 MRAC (HY-C) Brochure (Metric) | Technical data for CD-25 MRAC (HY-C) in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-25 MRAC (HY-C) Brochure (Imperial) | Technical data for CD-25 MRAC (HY-C) in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | herunterladen |
0081 II 2 G/D Ex d IIA T3 Ex tD A21
IP6X – T 200°C
LCIE 03 ATEX 6297
0081 II 2 G/D Ex d IIA T4 Ex tD A21IP65 – T 120°C
LCIE 03 ATEX 6297
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Single phase explosion proof/dust ignition proof motor
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 12.5 - 45 gallons (47.5 - 171 liters) - wet and 10 - 40 gallons (38 - 152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| EXP1-15-55 (TC) TE SERIES Brochure (Metric) | Technical data for EXP1-15-55 (TC) TE SERIES in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EXP1-15-55 (TC) TE SERIES Brochure (Imperial) | Technical data for EXP1-15-55 (TC) TE SERIES in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated singlephase T3 | Certification Document | herunterladen |
0081 II 2 G/D Ex d IIA T3 Ex tD A21
IP6X – T 200°C
LCIE 03 ATEX 6297
0081 II 2 G/D Ex d IIA T4 Ex tD A21IP65 – T 120°C
LCIE 03 ATEX 6297
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Single phase explosion proof/dust ignition proof motor
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 45 gallons (171 liters) - wet and 40 gallons (152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials. Equipped with a Dead Man Brake to avoid unit movement while on duty
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| EXP1-55 (DMB) TE Brochure (Metric) | Technical data for EXP1-55 (DMB) TE in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EXP1-55 (DMB) TE Brochure (Imperial) | Technical data for EXP1-55 (DMB) TE in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated singlephase T3 | Certification Document | herunterladen |
Pneumatic (Air) Models
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Pneumatically (air) operated
- Fuel, oil and Solvent recovery
- Activated Carbon Drum System acts as an Immersion Fume and Vapor recovery unit
- Capacity of 55 lbs. (25 kilos) of activated carbon pellets for the adsorption of contaminated fumes and vapors
- Recovery capacity of 15 gallons (57 liters) - wet and 17 gallons (64 liters) - dry
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| SS-25 AC TE (HY-C) Brochure (Metric) | Technical data for SS-25 AC TE (HY-C) in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SS-25 AC TE (HY-C) Brochure (Imperial) | Technical data for SS-25 AC TE (HY-C) in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Pneumatically (air) operated
- For wet & dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 12.5 - 45 gallons (47.5 - 171 liters) - wet and 10 - 40 gallons (38 - 152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| SS-15-55 (TC) TE SERIES Brochure (Metric) | Technical data for SS-15-55 (TC) TE SERIES in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SS-15-55 (TC) TE SERIES Brochure (Imperial) | Technical data for SS-15-55 (TC) TE SERIES in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | herunterladen |
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Pneumatically (air) operated
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 45 gallons (171 liters) - wet and 40 gallons (152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials. Equipped with a Dead Man Brake to avoid unit movement while on duty
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| SS-55 (DMB) TE SERIES Brochure (Metric) | Technical data for SS-55 (DMB) TE SERIES in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SS-55 (DMB) TE SERIES Brochure (Imperial) | Technical data for SS-55 (DMB) TE SERIES in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | herunterladen |
Note:
HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
Please be advised that all Tiger-Vac HEPA/ULPA Filters are DOP tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
